230mm Piranha Phoenix Cold Pressed cheaper Flush Cutting Diamond Blade Orange sandstone options

Product Title : 230mm Piranha Phoenix Cold Pressed cheaper Flush Cutting Diamond Blade Orange sandstone options

Type of material to be cut = more abrasive mixed density materials.
Depth of required cuts = 70mm
Cut quality needed = Dry or Wet
Description: 

• Description: Orange coloured diamond cutting blades are formulated in house and manufactured by Hardrock uk standards under the Piranha Diamond Products brand. Piranha diamond cutting blades are made to exceed the EN13263 standard this that blades can be fitted as a normal blade to a grinder with back locking nut.  Maximum operational speeds 6650Rpm 80mps.
• Recommended safety operational speeds:  1000-6650RPM / 12-80mps with a bolt on steel flange attached.
• We recommend a variable speed low vibration grinder for more detailed and it allows more control on difficult procession jobs.  
• We recommend a variable speed low vibration grinder for more detailed and it allows more control on difficult procession jobs. 
• We recommend extra safety PPE is used worn when flush cutting.  Some training should be given to identify the risks. But the flush cutting blade can serve as a potentially superior solution in some cases of use. 
• Must read and download all the data sheets and safety information in attachments. Risk Assessment and training on how to operate and how attach when to attach bolt on steel flanges. safe operating speed and procedures should be noted in the Exercises in the safety risk assessments. on each task.

Amber = This blade is designed for longer life and performance cutting on Stone and concrete and other  Hard stone materials, brick, better on grit stone .

• Premium Quality Diamond content.
• Use wet or dry.
• Best on Hard dense material like granite marble.
• 22.23mm centre with 6 Pre-drilled countersunk
• flange holes to bolt on a 75mm steel flange.
• 8mm High Turbo segments in a Rhino segment slot
• Multi cutting diamond blade, diamond carving blade, vanity blade
• Good for shaping and flush cutting, flat grinding (flange attachments)

Phoenix CP or cold pressed turbo blades are similar to a normal turbo blades except for the they are cheaply glued and pressed metal a mass produced diamond blade. They are not as safe as our Rhino premium  range that  goes through many stages of manufacture to ensure a premium finish 

Phoenix Blades CP  They are faster cutting and versatile as they can cut rounded corners and help in shaping or rounding edges of the stone. They work well when attached to a flange to give more control in shaping and doing small detailed work. centre 22.23 and pre-drilled for 6 holes 75mm flanges M14

About the segment diamond bond.

Piranha Amber for Sand stone  is a medium/bond alloy cold pressed glued pressed segmented diamond blade. with 100 diamonds grit, A mass produced cheaper blade.

Add a steel bolt on Flange

Adds more control and stability with quick release and flush cutting to your blade. Great care should be taken to ensure the blade is attached correctly and the screws are securely fastened. Recommended safety operational speeds:  2800-6600RPM / 18-75mps (reduce RPM when using flanged / flush cutting blade) use for 20 minutes maximum run time between breaks.

Flange Sizes Solid Steel 

50mm M14 centre with 4x M5 Screws  

75mm M14 centre with 6x M5 screws.

Trade Distribution        :-  It is possible to buy in bulk and stock this product as a reseller. Please contact Hardrock Uk,  The Stone Yard Irongate Barn, Holcombe Road, Helmshore, Rossendale, Lancashire, England 01706 220795   www.hardrockuk.com   

PIRANHA  DIAMOND PRODUCTS