diamond blade Archives - HardrockUk

M14 Diamond Grinding Turbo Cup wheels. 36 grit choice aggressive grinding disc

stephane — Mon, 09 Jul 2012 13:26:27 +0000

Product Title : M14 Diamond Grinding Turbo Cup wheels. 36 grit masonry grinding tool

Referance: Aluminium cup wheel-30#100#

Product EAN13 No : 5060546970880 (50mm-D-M14)

Product EAN13 No : 5060546970897 (100mm-D-M14) 100mm Diameter M14 Aluminium grinding cup wheel diamond-30#-100#

Product EAN13 No : 5060546979661 (125mm-D-M14-ALU-cup-wheel-30#-100# Masonry Grinding Tool)

Product EAN13 No : 5060546970903 (150mm-D-M14 ALU-cup-wheel-30#-100# Masonry Grinding Tool

Product RRP Price : £45.00 £85.00

Product Size : 2″ 50mm or 4″ or 100mm or 150mm 6″

Product Packing weight size: 6cm c 6cm x 3.5cm 0.250KG (50mm-D-M14)

Product Packing weight size: 12cm x 12cm x 3.5cm 0.500KG (100mm-D-M14)

Product Packing weight size: 13cm x 13cm x 3.5cm 0.550KG (125mmm Aluminium Cup wheel

Product Packing weight size: 18cm x 18cm x 4.5cm 0.800KG 150mm-D-M14)

No of Items in offer: One

Transitioning Diamond Layers rough24#,36# to 50#- last 3mm =100# smooth

Description : Masonry grinding tool for stock removal made from Aluminium cup wheels are better because the body of aluminium does not conduct (retain heat) unlike steel cup wheels.

Steel is a conductor of heat. The friction caused by grinding stone creates a build-up of heat and after 30minutes or so there can be a high temperature build up on the disc. , resulting in burnt fingers and destroying all the diamonds, making the cup wheels less effective. Heat creates burn marks in the alloys and pit holes of gas in the metal body. resulting in breaking up the segment on the disc. (Destroyed disc)

Aluminium cup wheels are better because they are balance perfectly. Each disc or wheel is lathed out of a single block of aluminium and centre threaded with M14 to fit all UK market grinders.

The Segment is molecular bonded to the surface of aluminium. The segment is moulded in our factory and stamped with the turbo pattern which is very rough to take off lots of material. The mould is imprinted to only a depth of 6mm24#,36# with a 3mm50# – 100# solid smoothing section to the bottom. Masons find this an advantage. They use a worn cup wheel disc to do fine finishing (removing saw marks from blades) They state there is no need for higher grits. One tool for the job. In fact, the man featured on our video (25 year’s experience) on our web site says “I have 2 cup wheels on the go. one to shape. when it’s worn past the turbo ridges, I use it to polish off. or to fine tune what I am doing. I find them good on lots of types of stone.(sandstone- hard & soft ) They don’t burn my fingers when I want to change them over.

Aluminium body turbo diamond cup wheels
4″ 100mm 5″125mm & 150mm 6″ diameter Aluminium body turbo diamond cup wheels
M14 centre
Full aluminium solid body
perfect balanced turned construction
24-30-50-100# diamonds coarse grinding in one segment
crowned continuous segment won’t break up
Made to above EN13263 standards
Recommended safety operational speeds: 2800-8500RPM / 18-58mps with it screwed directly to a M14 spindle. Maximum operational speeds 12000Rpm 80mps. for short durations. (=1h)
We recommend a variable speed low vibration grinder for more detailed and it allows more control on difficult procession jobs. We also recommend using a low vibration variable speed grinder for more control. and one with safety overload circuitry (electrical systems or clutches)

Trade Distribution :- It is possible to buy in bulk and stock this product as a reseller. Please contact Hardrock Uk, The Stone Yard Irongate Barn, Holcombe Road, Helmshore, Rossendale, Lancashire, England 01706 220795 www.hardrockuk.com

PIRANHA DIAMOND PRODUCTS

Check out as a guest in paypal to: = Entering your card details.

Pay with debit or credit card

The post M14 Diamond Grinding Turbo Cup wheels. 36 grit choice aggressive grinding disc appeared first on HardrockUk.

150mm D 6″ Rhino Prianha Diamond Blade 22 23 centre fange holes

stephane — Tue, 18 Sep 2012 14:03:37 +0000

Product Title : 150mm D 6″ Rhino Prianha Diamond Blade 22 23 centre fange holes

Product Referance: 150D-Rhino-Granite-Blade

Product EAN13 No : 5060546970323 (Blade only)

Product EAN13 No : 5060546970330 (with flange)

Product RRP Price : £26.00

Product Size : 6″ or 150mm

No of Items in offer: One

Description: Black coloured diamond cutting blades are formulated in house and manufactured by Hardrock uk standards under the Piranha Diamond Products brand. Piranha diamond cutting blades are made to a EN13263 standard this that blades can be fitted as a normal blade to a grinder with back locking nut. Maximum operational speeds 12000Rpm 80mps.
Recommended safety operational speeds: 2800-8500RPM / 18-58mps with a bolt on steel flange attached.
We recommend a variable speed low vibration grinder for more detailed and it allows more control on difficult procession jobs.
Must read and download all the data sheets and safety infomantion in attachments. Risk Assessment and taining on how to operate and how attach when to attach bolt on steel flanges. safe operating speed and proceedures should be noted in the Exercises in the safety risk assments. on each task.

Black = This blade is designed for fast performance cutting on Granite, Marble and other Hard stone materials, engineering brick, hard concrete, ceramics, very hard sandstone (gritstone) quartz stone.

Premium Quality Diamond content.
Use wet or dry.
Best on hard dense materials like granite marble.
22.23mm centre with 4 Pre-drilled countersunk
4x countersunk flange holes to bolt on a 50mm steel flange.
8mm high segments in a std segmented Rhino Turbo slotted
Segment size 35mm long, 8mm high, 3mm width. Rhino diamond cutting blade.

New better cutting performance

Info on segment; Designed with safety in mind each blade in professional quality diamond segments. Use the blade both wet or dry. Holes drilled on a CNC machine for perfect alignment and balancing with our flanges. Each blade has safety logos reminder to wear goggles, gloves, safety boots ect. Black Piranha Granite blades are a softer/ bond alloy hot pressed segmented diamond blade. with 40/45 diamonds grit, then cold gas dipped. This hardens the alloy but is left soft in the centre to allow for exposing diamond. The cold gas shrinks micro gas pockets in the metal. There is a huge 10mm high segment for extra wear. hey last a long time. Diamond content is around 30%. We added 4 flange holes to adapted blade to screw onto polishers or grinders so you can use flat to flush cut more easily.

This blade is ideal for cutting shaping of any stone the blade has a softer bondof diamond and this allows a faster cut.

Add a steel bolt on Flange

Adds more control and stability with quick release and flush cutting to your blade. Great care should be taken to ensure the blade is attached correctly and the screws are securely fastened. Recommended safety operational speeds: 2800-10200RPM / 18-75mps (reduce RPM when using flanged / flush cutting blade) use for 20 minutes maximum run time between breaks.

Flange Sizes Solid Steel

50mm M14 centre with 4x M5 Screws

75mm M14 centre with 6x M5 screws

Trade Distribution – It is possible to buy in bulk and stock this product as a reseller. Please contact Hardrock Uk, The Stone Yard Irongate Barn, Holcombe Road, Helmshore, Rossendale, Lancashire, England 01706 220795 www.hardrockuk.com

PIRANHA DIAMOND PRODUCTS

The post 150mm D 6″ Rhino Prianha Diamond Blade 22 23 centre fange holes appeared first on HardrockUk.

300mm(12″) kEYSEG Economical Diamond Blade 22.23mm diameterCentre bore 10.0H Blade only

stephane — Thu, 04 Dec 2014 15:51:07 +0000

Product Title: 300mmD 12″ Black keyseg Diamond blade only pre drilled flange holes

Product Referance: 300D kEYSEG Econo-20.00mmC-10H-Blade only

Product EAN13 No : 5060546970040-blade only

Product RRP Price :£27.85

Product Size : 9″ or 2300mm

No of Items in offer: One

SELECTING RIGHT DIAMOND DICING BLADE FOR YOUR APPLICATION

Type of material to be cut = Hard dense materials.
Depth of required cuts = 90mm
Cut quality needed = Dry or Wet

Description: Black coloured diamond cutting blades are formulated inhouse and manufactured to Hardrock uk standards under the Piranha Diamond Products brand. Piranha diamond cutting blades are made to exceed EN13263 standard this that blades can be fitted as a normal blade to a grinder with back locking nut. Maximum operational speeds 6650Rpm 80mps. for cutting.

Recommended safety operational speeds: 1000-6650RPM / 12-80mps with a bolt on steel flange attached. (20 minuities intervals)
We recommend extra safety PPE is used worn when flush cutting. Some training should be given to identify the risks. But the flush cutting blade can serve as a potentially superior solution in some cases of use.
Must read and download all the data sheets and safety information in attachments. Risk Assessment and training on how to operate and how attach when to attach bolt on steel flanges. safe operating speed and procedures should be noted in the Exercises in the safety risk assessments. on each task.

Black = This blade is designed for faster cutting on Hard materials like hard brick, granite quartz grained sandstones and other hard materials, brick, ceramics.

Premium Quality Diamond content.
Use wet or dry.
Best on Hard material like quartz granite.
22.23mm centre with 6 Pre-drilled countersunk
flange holes to bolt on a 75mm steel flange.
10mm High segments in a std segmented Key slot
Segment size 35mm long, 10mm high, 3mm width.

Black Piranha Blades mean suitable to be used on harder materials.

Designed with safety in mind each blade in professional quality diamond segments. Use the blade both wet or dry. Holes drilled on a CNC machine for perfect alignment and balancing with our flanges. Each blade has safety logos reminder to wear goggles, gloves, safety boots ect.

Segment size 35mm long, 10mm high, 3mm width.

Blade centre 22.23mmuk standard size.

Best value tracked -either 2nd class recorded on 2 blades / 1class recorded depending on order value.

Pack of 5 deal – (Attachments) special offer on 5x blades and get a free steel bolt on flange. Delivery is Parcel Force 48 hour.

Packing – packed in individual boxes with stamped Hardrockuk.com details.

Trade Distribution : – It is possible to buy in bulk and stock this product as a reseller. Please contact Hardrock Uk, The Stone Yard Irongate Barn, Holcombe Road, Helmshore, Rossendale, Lancashire, England 01706 220795 www.hardrockuk.com

PIRANHA DIAMOND PRODUCTS

The post 300mm(12″) kEYSEG Economical Diamond Blade 22.23mm diameterCentre bore 10.0H Blade only appeared first on HardrockUk.

313D ARIX 13H x 40L Normal Solid

stephane — Tue, 24 Jul 2012 09:22:28 +0000

ARIX machine diamond blades are the latest and most advanced technology in diamond tool industry.

Last much longer with even wear across each segment as the blade spins.

Cuts as perfectly as possible due to the diamonds being aligned and angled in rows or like a brick wall.

Layered Diamond segments. Each diamond is placed in a wall design. 30% Longer life. 20% more accurate. DeEper cutting with solid blades.

Delivery Royal Mail Special Deliver Item or Parcel Force 24

Parcel Force 4 day for Europe.

Special order

Different alloy bonds (metal for holding diamonds) are used for better effects on cutting different materials. (granite to soft lime stone, concrete, sandstone etc. Customers will need to order minimum quantities of 10 blades if they want them specially made to order. Production is around 30 days from receipt of money.

Washer centres 20mm, 25.4mm , 50mm, 60mm

Can fit on petrol saws cut very fast ! you need 20mm washer.

The post 313D ARIX 13H x 40L Normal Solid appeared first on HardrockUk.

363D ARIX 13H x 40L Normal Solid

stephane — Tue, 24 Jul 2012 09:04:51 +0000

ARIX machine diamond blades are he latest and most advanced technology in diamond tool industry.

Last much longer with even ware across each segment as the blade spins.

Cuts as perfectly as possible due to the diamonds being aligned and angled in rows or like a brick wall.

Layered Diamond segments. Each diamond is placed in a wall design. 30% Longer life. 20% more accurate. DeEper cutting with solid blades.

Delivery Royal Mail Special Deliver Item or Parcel Force 24

Parcel Force 4 day for Europe.

Special order

Different alloy bonds (metal for holding diamonds) are used for better effects. a minimum order of 10 is required.

Washer centers 20mm, 25.4mm , 50mm, 60mm

The post 363D ARIX 13H x 40L Normal Solid appeared first on HardrockUk.

463D ARIX 13H x 40L Normal Solid

stephane — Thu, 12 Jul 2012 15:47:47 +0000

463D ARIX 13H x 40L Normal Solid

ARIX machine diamond blades are the latest and most advanced technology in diamond tool industry.

Last much longer with even wear across each segment as the blade spins.

Cuts as perfect as possible due to the diamonds being aligned and angled in rows or like a brick wall.

Layered Diamond segments. Each diamond is placed in a wall design. 30% Longer life. 20% more accurate. Deeper cutting with solid blades

Special order

Different metal alloy bonds ( for holding diamonds) are used for better effects on cutting different materials. (granite to soft lime stone, concrete, sandstone etc.) Customers will need to order minimum quantities of 10 blades if they want them specially made to order. Production is around 30 days from receipt of money.

Washer centres 20mm, 25.4mm , 50mm, 60mm

The post 463D ARIX 13H x 40L Normal Solid appeared first on HardrockUk.